Why Does My Samsung Washer Keep Stopping Mid Cycle?

Doing laundry became an easy activity with a washing machine. But it is not the same if your Samsung washing machine keeps stopping mid-cycle. You are at the right place if you want to know the common causes and steps to fix the issue.

If your washing machine stops mid-cycle, it may be due to the faulty door lock. Replace the door lock to fix the issue. A faulty water inlet valve will also pause the washing cycle due to the blockage of water flow. You can fix it by replacing the new water inlet valve.

In this article, I will help you understand 6 common causes and steps to fix the issues. So, keep reading.

Check out our list of top-handpicked products for all your electrical, appliance, and HVAC system needs to keep your home running smoothly.

This post includes some affiliate links.

Table of Contents

6 reasons your Samsung washer keeps stopping mid-cycle (+Fix)

Samsung is a reliable brand known for its quality products.

Samsung washing machines are one such appliance for efficient laundry cleaning.

No matter how trustworthy the brand is, you may have to confront issues and faults regarding electrical appliances.

I know how annoying it would feel to begin the washing cycle only to see it stop mid-cycle.

But you don’t have to worry about replacing the entire washing machine.

Sometimes the reason would be as simple as the overloading of clothes.

However, there would be other issues that you could solve by replacing the faulty parts.

You can fix the issues easily when you find out the cause.

That’s what I have shared in this article.

Here are the 6 common reasons and easy steps to fix the issues.

Let’s get started!

1. Faulty door lock and door switch

The door lock plays a significant role in a washing machine.

It helps to lock the door tight when the washing cycle begins.

If the door is not latched properly, the washing cycle won’t begin or will stop mid-cycle.

There are several reasons for the damage to the door lock.

One of the common reasons is shutting the door forcefully.

When the door is latched properly, the door switch transfers the electrical signals to the control panel.

Thus, the washing cycle starts.

If the door is not latched properly, your Samsung washing machine won’t start.

During the washing cycle, the drum will agitate fast; if the door is not latched well, water will flood, and clothes will come out of the drum.

The washer won’t start the washing cycle until the door is latched tight to prevent these mishaps.

If this is the case with your Samsung washing machine, you must replace it.

Follow the steps below to replace the door lock:

Unplug the washer from the electric outlet to prevent electric hazards.
Open the washer’s door and remove the door seal retainer using a flathead screwdriver.
Push the door seal to the inner side of the door opening.

You can find the door lock assembly on the right side. Unthread the screws securing the door lock assembly.
Access the door lock at the rear side of the door assembly, and you can pull it easily as you remove the screws.
You can see wire connections to the door lock assembly. Disconnect the wire connections to detach the door latch assembly.

Purchase the new door lock assembly based on the model number of your Samsung washing machine.
Replace the new door lock assembly and reconnect all the electrical wires and position them in their place.
Reattach the screws to secure the door lock assembly.

Reposition the door seal and secure the door seal with the door seal retainer.
Close the washer’s door and plug it into the electrical outlet.

Check if the issue is solved, or else try the fixes below.

2. Faulty water inlet valve

Water inlet valves are located on the back side of the washing machine.

They are responsible for water flow to the drum of the washer.

Water inlet valves have a part called solenoids, which facilitate water flow by opening and closing.

If your washing machine stops during the rinse cycle, it must be due to faulty water inlet valves.

Because during the rinse cycle, a washing cycle will pause for a moment for the water to flow from the inlet valves.

A washer will completely stop the cycle if there is no water flow.

Another possible problem in the water inlet valves is the accumulation of dirt and dust.

A clogged water inlet valve will also block the water flow.

Unclogging the water inlet valves would be best to facilitate the smooth water flow.

If you are still unsure if the water Inlet valves are faulty, check it with the multimeter.

Consider referring to the user manual to know the reading of your Samsung washing machine.

Follow the steps below to replace the faulty water inlet valves:

Unplug the washing machine from the electric outlet to avoid electric hazards.
As water inlet valves are located at the back of the Samsung washer, push the washer forward for the space to work.
Turn off the water supply to the washing machine.

Unthread the screws securing the top panel. Detach it and set it aside.
After removing the top panel, you can see two water inlet valves on the left side.
Unthread the screws securing the water inlet valves to detach them from the washer.

You can see many electrical wire connections with the water inlet valve, consider taking photos of the electrical connections for future reference, or you can choose to label the wires.
Disconnect the electrical wire connections from the water inlet valves.
Pull the water inlet valve from its position.

Remove the Jubilee clips from the two water inlet valves using a plier.
After removing the clips, you can pull off the hoses from the water inlet valve.
Purchase the new water inlet valve based on the model of your Samsung washing machine.

Reattach the hoses to the water inlet valve and secure them with the Jubilee clips.
Replace the new water inlet valve in the slot and reconnect all the electrical wires referring to the digital photo you took.
After making the electrical wire connections, secure it with the screws you removed.

Detach the top panel and secure it with screws.
Turn on the water supply. And move the washing machine to its original position.
Plug in the washer and begin the washing cycle to check if the issue is solved.

3. Main control board issues

The main control board carries important functions such as monitoring the sensors, controlling the speed of the drum, maintaining the proper temperature, and initiating the washing cycle by switching on the washer.

The control panel is the mini-computer that acts as the brain of the washing machine by transferring electrical signals.

It also transfers power to the drive motor, drain motor, and solenoids.

If the control panel is faulty, a washer will not function efficiently.

In such a case, you must replace the main control board.

Follow the steps below to replace the main control board:

Unplug the washer from the electric outlet to prevent electrical hazards.
Move the washer forward to access the back of the washer.
Unthread the screws from the back cover to detach the washing machine.

And now, you can see two screws securing the control panel.
Unthread those two screws to tilt the control panel to access the internal parts.
You can see the top cover covering the control board and other components.

Release the locking tabs to pull out the top cover.
After releasing the top cover, you can see the main control board having several electrical wire connections.
Consider taking digital photos before detaching the wires.

Now, detach all the wires and wire harness from the man control board.
Detach the main control board from the control panel by removing four screws securing it.
Purchase the new main control board based on the model of your Samsung washing machine.

Realign the new main control board in the slot and secure it with the locking tabs.
Reattach the screw to secure the main control panel.
Reconnect all the electrical wires and wire harnesses, referring to the photo you took earlier.

Reattach the top cover by securing it with the locking tabs.
Now, realign the control panel in place and secure it with two screws.
Reattach the back panel and secure it with screws.

Move the washer to the original position.
Plug in the washer and start the washing cycle. Check if the issue is solved.

4. Faulty timer

A timer in the washing machine helps to schedule the washing cycle at your desired time.

And also it controls the important systems in the washing machine.

Time is made of movable parts like springs and motors, so they may be worn out or damaged.

To check the working condition of times, you must check it with the multimeter.

You must replace the timer to fix the issue if it shows no continuity.

Follow the steps below to replace the timer:

Unplug the washer from the electric outlet.

Block the water supply to the washing machine by turning off the water supply valve.
Unthread the screws from the control panel and tilt them backward. Secure the control panel with the hinges to secure it from falling from the washing machine.
Access the knob of the timer and turn it around while observing the backside of the timer.

Pull the timer knob and secure it in a safe place.
Access the timer at the back of the control panel.
You can see the timer dial attached to the timer. Detach it from the timer.

Unthread the screws securing the timer in the slot. Pull the timer and set it aside.
Purchase the new timer based on the model number of your Samsung washing machine.
You can see a few wires and a wire harness connected to the timer. Disconnect them from the timer after taking the digital photo for future reference.

Purchase the new timer based on the model of your Samsung washing machine.
Place the new timer in the control panel and secure it with the screws you removed earlier.
Reattach the new time dialer.

Reconnect the wires and wire harness by referring to the photo you took.
Reattach the timer knob to the control panel.
Reattach the control panel and secure it with the screws you removed.

Move the washer to the original position and turn on the water supply valve.
Plug in the washing machine and check if the issue is solved.

5. Faulty hose pipes

Drain hoses help to expel water from the washing machine at the end of the washing cycle.

If the hose pipes are clogged due to the accumulation of dirt and debris, it delays water flow outside the washing machine.

You must unclog the drain hose pipe in such a case to fix the issue.

Follow the steps below to unclog the drain hose pipes:

Turn off the power supply to the washing machine.
Turn off the water supply valve to block the water flowing to the washing machine.
Locate the filter access door in your washing machine. Most washing machines have a filter access door at the back of the washing machine.

You can see the drain hose and filter when you slide it open. The drain hose will be secured with the retainers. Detach it from them. Remove the filter by turning it in a clockwise direction.
Clean the filter with soapy water. Use a brush to remove all dirt and debris accumulation.
Unclog the drain hose using a vinegar cleaning solution to remove stubborn clogs.

Secure the drain hose to the retainers and reattach the filter to the filter housing.
Reattach the filter access door and secure it in the slot.
Move the washer to its original position and turn on the water supply valve.

Plug in the washer and begin the test washing cycle to check if the issue is solved.

6. Faulty drain pump

You can locate the drain pump at the bottom of the Samsung washer.

The main function of the drain pump is to pump the water from the washing machine to the drain hose to expel it.

If the drain pump is faulty, the washing machine won’t let the water expel out, causing the washing machine to stop mid-cycle.

To fix this issue, you must replace the drain pump.

Follow the steps below to replace the drain pump:

Unplug the washer from the electric outlet to prevent electrical hazards.
Turn off the water supply valve to block the water flow during the repair.
The drain pump is located at the bottom of the washing machine.

Tilt the washer machine to its side to access the bottom panel.
Now, you can see five screws securing the bottom panel. Using a Philips screwdriver, unthread the screws to detach the bottom panel.
You can see an internal drain hose. Remove the jubilee clips securing the drain hose to the drain pump.

The drain pump is attached to the filter housing, so you need to remove the filter housing.
Open the filter access door. Pull the door to detach it from the washer.
Unthread the two screws holding the filter housing.

Now access the bottom panel to locate the filter housing inside the washing machine.
Detach the black and red wires attached to the drain pump.
Detach the filter housing from the washing machine.

The drain pump is attached to the filter housing.
You can see three screws securing the drain pump with the filter housing. Unthread those screws to detach the drain pump from the filter housing.
Purchase the new drain pump based on the model of your Samsung washing machine.

Replace the new drain pump with the filter housing and secure it with the screws.
Reattach the filter housing to the washing machine and secure it with the retaining clips.
Reattach the black and red wires to the filter housing.

Reattach the drain hose to the pump and secure it with the jubilee clips.
Reattach the bottom panel and secure it with screws.
Reattach the screws to secure the filter housing and reattach the filter access door.
Bring back the washing machine to its original position.
Move the Samsung washing machine to its original position.
Turn on the water supply valve and plug it into the electric outlet.

Begin the test washing cycle to check if the issue is solved.

How do you reset a washing machine mid-cycle?

Resetting the washing machine helps to re-energize and reboot it.

It also clears the control panel glitches causing this issue.

Follow the steps below to reset your Samsung washing machine that keeps stopping at the mid-cycle:

Unplug the washer from the electric outlet.
Drain the excess water and clothes from the drum.
Wait for 10 minutes.
Plug in the washer after 10 minutes.
And begin the test washing cycle to check if the issue is solved.

Final thoughts

Samsung washing machines last up to 7 to 10 years. It is important to take proper care of the washing machine to avoid unnecessary faults and failings.

You must clean the washing machine drum regularly for effective laundry cleaning. Your washer stopping at the mid-cycle is because of the overloading of clothes and failures of the internal parts.

A faulty door lock may be causing the issues. If the door lock is faulty, a washer won’t start. Another common reason is the faulty water inlet valves. A washing machine won’t receive water if the inlet valves are clogged or broken. Thus, not completing the washing cycle.

I have shared the six common issues and steps to fix the issues in the Samsung washing machine that keeps stopping mid-cycle. After figuring out the cause, you must fix the issue by following the steps mentioned in the article.

Reference: Samsung Official washer manual.